One_Macaroon1592

One_Macaroon1592 OP t1_irr0580 wrote

Reply to comment by _KJuns in Keychron q1v2 by One_Macaroon1592

No need to worries, now I get what u mean, last question is the max height of the silicon sheet is 0,5mm for don't touch the pcb or can in go with 1mm?

Ps: I'm Italian so German is gonna be worse than English ahah

2

One_Macaroon1592 OP t1_irqvwaq wrote

Reply to comment by _KJuns in Keychron q1v2 by One_Macaroon1592

Okok understand, the pc plate haven't already standoff (I think because is from AliExpress) so rn it isn't screw in with PCB, when I remove the foam plate should I remove gasket or not? I don't get it why disconnect the silicone to the pcb, can cause short of PCB?, sorry but I'm not English and I don't understand where you go with this.

2

One_Macaroon1592 OP t1_irqsgov wrote

Reply to comment by _KJuns in Keychron q1v2 by One_Macaroon1592

Oh ok, yeah rn that's no flex but is not a thing that matter to me at all, to be honest I don't like it.I will try to get a silicon sheet so small. Plate foam u mean the foam between PCB and plate?

2

One_Macaroon1592 OP t1_irqqvv9 wrote

Reply to comment by QWERKey-UK in Keychron q1v2 by One_Macaroon1592

Thanks, I forgot to say I used the board two weeks without any mod and only with two silicone sheet 2mm (so 4mm in all) and sound wasn't that bad, less creamy but more thock than now. Anyway u can be right, I will try to remove one switch pad and hear the difference. Ty.

1