Cut the holes out 1st then lay the laminate and take the laminate out with a bottom bearing trimmer, may want to put masking tape around where the hole is so you don’t scratch the laminate and a quick rub round the edge with sandpaper as will leave a sharp edge. This is how we done it at a place I worked but may be better options.
National_Rip9097 t1_jd6zpdc wrote
Reply to New kitchen countertops from 3/4 in mdf cut sink hole first or lay laminate first ? by Josh_Cordero
Cut the holes out 1st then lay the laminate and take the laminate out with a bottom bearing trimmer, may want to put masking tape around where the hole is so you don’t scratch the laminate and a quick rub round the edge with sandpaper as will leave a sharp edge. This is how we done it at a place I worked but may be better options.