Submitted by skinnylynnie80 t3_1201t1n in rva

Does anyone have a recommendation for an installer. 100 year old home with rotting wood siding. I want to get it wrapped and have the siding replaced. I have 1 estimate from Jacob's Ladder. Any suggestions or stay away froms?

4

Comments

You must log in or register to comment.

geneb0322 t1_jdfcwet wrote

I had hardiplank (and gutters, sheathing, and new trim) installed by Retex. They weren't the cheapest but they also weren't the most expensive and they did an okay job. Solidly middle of the road.

Hardiplank is a great siding, though. I never want to have to go through that mess again, but finally having siding that doesn't rot away every couple of months is such a relief.

5

Charlesinrichmond t1_jdfnnke wrote

It actually can rot annoyingly enough. It's not rot but it's functionally equivalent. Not a big issue in Richmond generally but don't let snow accumulate against it

What happens is the cardboard inside the concrete gets wet and swells and everything blows up

2

lunar_unit t1_jdg82gm wrote

Installation also says that cut ends need to be sealed (paint or caulk) and it has to be two inches above a roof or other horizontalish surface.

I've had to replace a bunch on dormers because it was installed in contact with shingles, wicked water flowing down the roof pitch and disintegrated. I've also seen it disintegrate from splash back on decks with no gutters above.

As an aside, I'm pretty sure the historic districts won't accept Hardi on the front facade of a house, but I can't find anything definitive about it at the moment. Do you know if this is accurate?

3

Charlesinrichmond t1_jdhpayl wrote

yeah, I thought they actually increased the reveal from roof in snowbelt? Can't remember offhand.

I would bet you were right on historic ex-CAR permission, but I bet you could get boral through as the reveals and shadow lines are better.

Current cypress sucks as much as hardie

2