blorg t1_jabtqk6 wrote on February 28, 2023 at 8:22 AM

Reply to comment by eaterofthesoil in The Sennheiser veil is too real by rob417

Harman will increase the bass quite substantially on the HD600.

So do you want Harman or decreasing the bass?

Neither of these EQs will decrease the bass, both will increase it, Harman above flat, Oratory1990/USound up to flat.

If you don't want the bass boost to be honest the HD600 is extremely close already and there is no need or reason to EQ it.

On PC I use Equalizer APO, for mobile I use a Qudelix 5K.

Android apps for EQ there is Wavelet which is free. You need to convert PEQ to use- you can do this using the equalizer tab on Crinacle's graph tool, and "download for Wavelet". Or Poweramp EQ you can enter PEQ values directly.

eaterofthesoil t1_jacarfv wrote on February 28, 2023 at 12:13 PM

yeah im using poweramp peq. so i was already asking for where could i find the Usound eq values if possible?

oratory1990 t1_jacerk3 wrote on February 28, 2023 at 12:54 PM

Same as for the Harman Over-Ear target, just with the gain of the 105 Hz low-shelf filter set to 0 dB.
Or better yet: set it to whatever sounds best to you, anywhere from 0 to 15 dB is fine.

eaterofthesoil t1_jacpu75 wrote on February 28, 2023 at 2:26 PM

thanks!

blorg t1_jaciz7j wrote on February 28, 2023 at 1:32 PM

It's on the list of presets in my previous comment, it's the one for the HD600 labelled "Optimum HiFi Curve". This is the direct link:

https://www.dropbox.com/s/ygs3wfnj4ntgmhq/Sennheiser%20HD600%20%28Optimum%20HiFi%20Curve%29.pdf?dl=0

Or as Oratory replied to you, you can just leave the shelf off the Harman target.

eaterofthesoil t1_jacpshc wrote on February 28, 2023 at 2:26 PM

thanks.