Comments
The_Poster_Nutbag t1_j7ipezu wrote
That's exactly my first thought.
Reddit-username_here t1_j7itfpv wrote
Some varnish and stains will fucking spontaneously combust.
BuffaloInCahoots t1_j7kndhe wrote
If it’s still the same as it was years ago, a lot of them will. I did stain and lacquer work for a summer. At the end of the day, all the stain rags would go in a metal bucket with water in it. We’d put a lid on it and set it in a wide open area.
Reddit-username_here t1_j7kuinb wrote
Nowadays they have some water-based stains and shit.
m_i_c_r_o_b_i_a_l t1_j7lqjv9 wrote
Finishes with drying oils like boiled linseed or tung are known for doing this. They self heat as they polymerize so a pile of them could heat up to the ignition temperature because the heat won’t escape. Placing them in a bucket with plenty of water prevents this by the thermal mass of the water and blocking the oxidation of the oil. Laying them flat away from each other also works by preventing the heat from building up.
Putting a flame or heat gun next to the finish isn’t such a great idea either. There’s often flammable chemicals in finishes beyond just the oils.
dublea t1_j7lf2ib wrote
I would also be concerned. Add that most plastic doesn't magically shrink when heat is applied; like that bottle does.
There's a reason I don't use short form content for educational purposes... F that.
sadetheruiner t1_j7iscd4 wrote
Thinking the same thing.
gahidus t1_j7lhd6z wrote
And here I thought this was fish sauce or something.
Frundle t1_j7lq8vx wrote
They're more safe in the can, and the flash point is high. Where they become most dangerous is when a rag or towel is used to wipe up excess and then thrown away. As the finish cures, it releases enough heat that it can ignite the rest of the trash.
Supposedly, the fire that burned Seattle to the ground in 1889 was started by a glue pot in a woodworker's shop.
Goolajones t1_j7ninak wrote
I mean. Obviously it worked. We saw it work.
bobjoylove t1_j800wxl wrote
There’s a flicker of fire in the can during the video.
MadMattBeyond t1_j7izl8r wrote
Forbidden Worcestershire sauce
Thor4269 t1_j7iqcig wrote
/r/diwhy
azducky t1_j7kpydy wrote
So you got an empty bottle but instead of using the bottle as is you cut it up and play with power tools (exaggerated) to form a hybrid bottle? Maybe instead of buying a $20 heat gun you buy a $1 funnel.
Sparkyisduhfat t1_j7lyo7o wrote
Lol I was gonna say this is pouring into a bottle with extra steps
eunson t1_j7l65f4 wrote
I think it's so you can store it later if you don't use it all.
motodriveby t1_j7l8bac wrote
Their point was why not pour the liquid inside the already intact bottle instead of making a Frankenstein bottle
lurker12346 t1_j7lrmi5 wrote
you can keep the label maybe
Makenchi45 t1_j7m6srb wrote
Peel off and use tape?
[deleted] t1_j7j24mk wrote
Pouring from one small container to a similar but deeper small container. Hmmm.
m_i_c_r_o_b_i_a_l t1_j7lrlz0 wrote
This isn’t a good idea with almost any oil based wood finish. This would leave a lot of oxygen in the container so it will solidify if you don’t use it in a few weeks.
I purge my finish cans with argon from my welder to keep the can usable longer. It’s cheaper than bloxigen at the wood working shops.
Also wipe up messes so your can doesn’t need the jaws of life to open them.
[deleted] t1_j7luecq wrote
The whole thing is pretty dumb. Oh, the internet. The downfall of humanity continues.
jrey800 t1_j7kdm3m wrote
There’s literally a fire hazard symbol on the can, this isn’t smart, it’s insanely lucky
Bimancze t1_j7kxedz wrote
plot twist: what's left in the can is the aftermath of burning it
SaveFailsafe t1_j7kedog wrote
What was wrong with the first container that it needed to be poured into another?
states_obvioustruths t1_j7lhdh3 wrote
The problem is that it was purchased by an idiot.
Source: they took a heat gun to a can of highly flammable material.
blondechinesehair t1_j7lvx7v wrote
That’s actually the other half of the bottle
Luvbugg326 t1_j7ksg57 wrote
Forbidden Soy Sauce
MakeSouthBayGR8Again t1_j7kua28 wrote
This is fake. This can of Teak Varnish comes with a resealable lid.
Chaisz3r0 t1_j7laucv wrote
Yea, but they ruined it. Life's harder when you're stupid.
floridbored t1_j7iu477 wrote
‘cause most people have a heat gun lying around (I do NOW, after many years)
pixel8knuckle t1_j7kyabq wrote
All that to pour it into another cup.
Cdub7791 t1_j7iqpba wrote
Wut?
Qataghani t1_j7lbbw2 wrote
lol yes when you open the lid like that its goner, you need a new lid....lol
phizappa t1_j7ji803 wrote
11 secret…shhh…spices and herbs.
kooby95 t1_j7kybuu wrote
Stupid.
[deleted] t1_j7j9lbd wrote
[removed]
xmromi t1_j7kuxde wrote
The thick and short stub of a thumb... can't be unseen
AvianMC t1_j7l146l wrote
💥
NegaDeath t1_j7ljy3y wrote
Mines currently on fire. Should I apply more heat?
BronsonBuster t1_j7lk9x2 wrote
Reddit really is becoming Facebook
drawredraw t1_j7lth3j wrote
I like how they intentionally destroy the lid to make it look like a useful trick.
drawredraw t1_j7ltibi wrote
I don’t have time for all this
keener91 t1_j7m1fap wrote
Is anyone posting to his Snapchat to stop idiots for doing this themselves?
keener91 t1_j7m1gos wrote
Is anyone posting to his Snapchat to stop idiots for doing this themselves?
CrushablePaper t1_j7m3p4b wrote
Neat trick 👍 check if the stuff is uv sensitive if you're going to store it like this
TempleOfDoomfist t1_j7m6vgb wrote
Downvoted. This is stupid
Vispin92 t1_j7mfclh wrote
Umm, burned plastic fumes are toxic, aren't they.
Dr_Catfish t1_j8gcs70 wrote
So is varnish.
[deleted] t1_j7ml4d4 wrote
Video maker forgot to think about why the manufacturer didn't put the contents in a bottle to begin with, and why they put it in a container that can be resealed air tight.
wyohman t1_j7nw28p wrote
If you're stupid
EMAW2008 t1_j7o3bnb wrote
Holy fuck don’t do that if it’s flammable/combustible.
jgreg728 t1_j7jfuv4 wrote
Huh?
Krakensten t1_j7llz3n wrote
Thats neat
DrEnd585 t1_j7n44cr wrote
An actual fucking lifehack. Kinda neat
ChanThe4th t1_j7ln3u5 wrote
This is a HORRIBLE idea that could genuinely result in sickness.
These plastics are not designed to be heated and melted then eaten out of again, they are EXTREMELY fragile to temperature unless SPECIFICALLY designed to endure them.
DO NOT DO THIS unless you are 10000% sure this plastic won't release toxic or cancerous chemicals that will be absorbed by the food or liquids running over them.
boomer478 t1_j7lscwl wrote
I think eating wood varnish is a worse concern than a melted bottle.
This is still a stupid idea, but not for the reasons you've listed.
[deleted] t1_j7iv8r1 wrote
[deleted]
[deleted] t1_j7imrgj wrote
[deleted]