A firewall is either a piece of software or a physical device that protects an network or a PC/Server from unauthorized access.

The name comes from Firewalls in Cars or Houses which are physical barriers meant to prevent fire from spreading into the passenger compartment or into an adjacent room/house. Like a Firewall in a car a computer Firewall prevents malicious activity from coming into your network from the internet.

The most basic firewalls look at port traffic coming to a device and stop unsolicited traffic. ie any traffic that is trying to access a port that shouldn't be accessible to a hacker.

More advanced Firewalls are called NGFWs (Next-Gen Firewall) or WAFs (Web Application Firewall) that actively look at packets and traffic looking for signs of malicious activity and stop it before it goes to a server.

[removed]

Note that firewalls, both the classic and digital versions, are designed to delay for a period of time, not completely stop the danger on the other side. Given enough time without any changes to the firewall, it can be breached (either through intense fire or novel digital attack it's software hasn't been made aware of).

Or by someone drilling a hole in of an inappropriate size (making firewall policies with more allowance then needed).

When another computer tries to talk to your computer the firewall either allows that communication or not.

Originally, it's a barrier that prevents or slows fire from spreading. Some buildings have internal walls that separate them into sections that resist fire spreading across them. If you are inside such a buildingm you'll be able to recognize the firewall as it will have special doors that are either kept closed or have special latches that cause them to automatically close if the alarm goes off or the temperature gets too high.

Vehicles can also have firewalls. The divider between the passenger compartment and the engine compartment of a typical car is called a firewall because it's designed to keep fire and other dangers from the engine from getting to the passengers.

Computer firewalls are named by analogy to physical ones. They are systems which block certain traffic from crossing a network connection. A firewall will have a set of rules saying "this can cross over" and "this can not cross". The specifics of those rules can vary considerably depending on what they are meant to protect against.

I’m in an intro to networking class. My professor said there are tons and tons of acronyms. We come across dozens each chapter. Here you are dropping 2 more on firewalls. It seems the networking field is completely overrun with acronyms lol

PCMCIA - People Cannot Memorize Computer Industry Acronyms

Imagine there’s a massive wall into a country. The only way to pass through is a road with guards working. It has 2 directions, incoming and outgoing.

The people working there have a set of rules that you have given them that they have to stick to. Eg. Only let a specific person in and turn everyone else around, let everyone in, turn everyone around, turn around a person with a specific ticket number (port numbers)

There’s some more concepts to this, but that’s the gist of it.

[deleted]

Pfft, to ensure your WAN has no issues with your IPSec mesh, make sure your ACLs are set, get OSPF or BPG working, and be sure to set your TCP MSS so that you don't get DF flags causing issues due to MTU. And to ensure your VoIP QoS setup the VLANs with appropriate CoS to ensure your RTP is smooth, and that your SIP ALGs are setup properly

In the simplest terms, a firewall is a peice of software that reads the contents of a packet as it attempts to enter and leave a device.

Some networks are set up with special routers who's only purpose is to run this software, and receive incoming traffic, inspect it, and pass it on (or drop it) based on if it thinks it's safe.

How firewalls work, well that's a little more complicated.

Essentially, most designs come down to a giant flowchart of rules. Each step in the flow chart will perform some task based on the information being inspected, and will make a decision based on the result. Generally, the decision will be to either

1.) Drop the packet, meaning to not let it pass, and move on

2.) Accept the packet, meaning to let it pass and move on

3.) Jump to a new rule, meaning divert into an alternative branch of the flow chart

4. Pass, meaning to just do nothing and the let the next rule decide.

Most of the time you'll set up a chain of rules so that if you pass every step, you get to go to the next one, but if you fail you get dropped. This is like a logical and. "You must be this tall to ride AND you must be wearing your swim trumks"

Sometimes you'll do the opposite, where success means you're accepted, and failure means you get passed along. This is a logical OR "You must pay full price OR have a coupon"

Jumping is most helpful when you want rules to only apply to certain types of packets. So, if for example you wanted to detect when someone was uploading a file to your file server, as opposed to browsing a website hosted on your network, you might have extra rules to make sure the file they're trying to send is safe and normal before giving it the all clear. But those rules don't make sense when looking at website browsing traffic, so we branch to the file upload rules when we detect it happening.

What the rules actually look like can be pretty complex too, but because speed is a priority you often do your simplest checks first to try and reduce the amount of times you have to do your more complex checks. If a packet is going to be dropped the objective is to detect and drop it asap so as not to waste resources.

The simplest and most common rule checks whether a specific value is at a specific location. It's like saying "is the third letter in this sentence an 'l'. The third letter was not an l, do we fail the rule and move on. Sometimes these rules get a little more complex. We might want to check if any one of several values exist in a particular location. We want an OR. The problem is, we are in the middle of a large AND, how do we resolve this?

To do this, we'd do some jumping magic. We jump to a chain of OR rules. Then, instead of accepting the packet, we go back to where we jumped from, and treat the jump statement like a sungle rule that either came back true or false. This very powerful technique is like having parentheses and let's us make very nuanced and deeply nested queries out of very simple and thus very quick parts.

The next most complicated rule is not just a matching rule, but a pattern rule. Rather than look for a value in a single place, we ask does this value occur anywhere in a range of places. Because firewalls are often designed to be minimal and fast, there are many implementation that cut even this basic function just to be better at doing the most simple queries. The solution, we use multiple firewalls at once. An example of one of these more complicated firewalls is called Snort. Snort let's you do all kinds of complex pattern based queries looking for complex patterns of data in anything you might want to examine in a packet. Of course, it's slower, but it's unbelievably powerful and is the backbone of every secure network.

Final though, we get to the mack daddy of firewall rules. Stateful inspection. Sometimes we aren't just looking at a pattern in a single piece of data, in a single packet. Sometimes we need to find a pattern across multiple packets. Sometimes we store information from one packet to help analyze the packets that come after it. Now we're not just slowing down, now we're using memory. That's a big and expensive cost for something that's supposed to examine everything, so we usually reserve it for critical needs and systems, or only inspect a random sampling of traffic this way. In either case, stateful inspection is the king. There's no part of a session or protocol you can't examine that way. Any question you want to ask, any criteria you want to use, stateduk will get you there. It's just slow and expensive and only useful in a tiny tiny minority of cases.

Computers communicate to each other over a network. To enable this they open ports where they listen to communication.
A firewall is something you put somewhere in the network to block access to those ports for computers that should not have access.
The firewall can be on a computer or between a network and the internet.