Comments

You must log in or register to comment.

Spork_Facepunch t1_jdejb6s wrote

There are polarized particles in the glass that change orientation when they receive an electrical voltage through the edge of the panel. When the voltage changes, they reorient themselves and block some of the light.

2

Any-Growth8158 t1_jdeji98 wrote

They're LCD screens without the reflective part. There is a polarization filter and the liquid crystal. When the polarizations are aligned it lets light through. You can control the polarization of the liquid crystal by applying a voltage. The greater the polarization mismatch the more of the light that is filtered and the darker the window.

It's the same idea to taking two polarizing filters and rotating them relative to each other. Instead of mechanically rotating one filter you adjust the molecules with an application of electricity to change the polarity.

6

_Connor t1_jdek7f7 wrote

There's a film applied to the window that has a layer of liquid crystals sandwiched in-between two pieces of plastic.

When the film is turned 'off' the liquid crystals can do whatever they want which creates opaqueness in the window as they're all just scattered about.

When you turn it 'on' a current of electricity is run through the film which causes all the liquid crystals to snap into alignment and become clear.

It's called PDLC film.

31

manic47 t1_jdesnlq wrote

It’s got a LCD film in it.
When energised the crystals in it align and it becomes opaque.

The mirrors in my car have the same film and will automatically darken at night to stop any chance of getting blinded by reflected headlights.

−1

TisIChenoir t1_jdezlbo wrote

Replying to _Connor (#2,324,152)

I've put some of those up on an office space we designed, years ago. Except it was included in the glass between two panes.

It's crazy expensive, and let me tell you, we didn't took any chances with the stuff.

2

CrimzonGryphon t1_jdf0rdl wrote

I briefly read about this to learn more. From my brief understanding, the users talking about polarising filters are not quite right. U/connor is right.

PDLCs seem to be the predominate type in planes.

While in displays, LCs are used to control polarity of light, in PDLCs they are used to control the degree of light scattering (lower voltage = more scattering = more opaque)

2