Viewing a single comment thread. View all comments

HV_Medic t1_j1on6od wrote

Reply to comment by StatusBard in glarses would be proud (BRRRR) by laffeybunn

Yes, they are all Hakko products and here are the part numbers:

The nozzle that comes with the FR-301 is N61-08 (it has a 1.0mm opening).

The cleaning pin for that nozzle (1.0mm) is B1087.

The drill cleaner is B1303 for 1.0mm nozzles.

The ceramic filters are A5044 (in a ten pack).

The FR-301 uses the N61 series nozzles and there are many to choose from, see Hakko's website for more, but the N61-08 is probably the most popular.

So far, I've gotten all of these parts from Amazon, but I'm sure there are plenty of other vendors that have them including from Hakko directly.

4

shugix t1_j1opl2j wrote

I would recommend getting a 888-001 Cleaning Drill. I found it quite useful the times mine got clogged. Most of my clogs are at the opening of the solder holder tube thing.

4

laffeybunn OP t1_j1s340y wrote

You are a legend I'll have to buy these (I didn't buy the fr-301, too poor for that)

1