Submitted by pedrorq t3_yzno5b in MechanicalKeyboards
Ihadtosubscribe t1_ix3n4c2 wrote
Try wrapping the wire with teflon. No seriously, it works very well. Start wrapping on the short side and end in the middle, so that it won’t unwrap
yfa17 t1_ixbt26k wrote
Until it doesn't or has lube over top. Once you lube over it and it starts peeling, the stab becomes a mess.
Not worth it over using just lube imo
Ihadtosubscribe t1_ixfl537 wrote
if you wrap it correctly (the start of the tape is covered by wrapping over it and you end in the middle, where there's no lube and doesn't grind against the stem since it stays still) there's no way it peels. Been good for the past 7 months which is light years ahead of whatever you can achieve with lube or any other mod. You could actually barely lube the stab and it would still sound fine.
yfa17 t1_ixfpd7e wrote
I'm 100% sure I did it correctly wrapping it over the start. This is well documented in the thockpop discord which made this popular.
I tried using OWLstabs and it was peeling within a month after lubing. Switched to plugging with a syringe on Tx stabs and haven't looked back since.
Viewing a single comment thread. View all comments