Viewing a single comment thread. View all comments

Joe_Scotto OP t1_itnswa1 wrote

Reply to comment by darknessblades in Me and all the keyboards I’ve designed and handwired over the last month. by Joe_Scotto

I ordered some RP2040 boards today with the intention of making something larger than I normally do.

2

darknessblades t1_itpcqev wrote

Is it a split keyboard ergodox/moonlander Hybrid? [this is what I am planning on making]

2

Joe_Scotto OP t1_itpopjz wrote

It will be split. Not sure as to what else yet.

2

darknessblades t1_itpqbiw wrote

This will be the "rough" layout for my "ergolander" keyboard

https://media.discordapp.net/attachments/811722556591177788/1034443093535105054/ergolander_layout.png?

​

KBlayout raw:

https://github.com/darknessblade/QMK_ergolander/blob/main/ergolander%20kb%20layout

1

Joe_Scotto OP t1_itpqo5g wrote

Nice. Are you going to use filament for that hinge or how will that work?

1

darknessblades t1_itpxdog wrote

Not sure, [The layout as I designed it is still quite basic to get a feel for it] [could change the hinge mechanic] but it will be either Filament and some m3 bolts, or a TRRS connector

{aliexpress}

/item/1005002511925055.html?

[Which will be the way the thumbcluster is connected]

So in essence the Thumb-cluster is a stand-alone unit [without arduino], that can be removed if not needed
--------
Not the best at programming with QMK,

So I could use some help on that front. {it will be hand-wired, so no RGB yet}

------

Already uploaded the VIA definitons file, so I am getting there step by step

2