Submitted by cube_7x t3_yd1584 in MechanicalKeyboards
Comments
JohnyNFullEffect t1_itpnnk0 wrote
Smol
cube_7x OP t1_itpo4uy wrote
It’s all about what’s inside
MadirianInfluence t1_itpuibb wrote
Wow, nice! Also, fellow ISO-DE user here. Currently setting up my Rollow and getting used to it as it is my first ortho split kb
cube_7x OP t1_itpz01m wrote
Very nice I’m sure you will have fun with it! I love the ortho layout, it’s so nice.
cube_7x OP t1_itq6j0o wrote
Yes you can see them above the CTRL Keys, i used staggering push buttons.
cube_7x OP t1_itqglch wrote
Thank you! We need more split boards in this sub 😬
TheMechKeebFan t1_itr2mtl wrote
Hello! What are the key caps and how you configure it in Mac? Thank you !
cube_7x OP t1_itr37xx wrote
Hey, i salvaged the keycaps from my Vortex Tab75. You can use the build in keyboard settings to link keys to different functions.
Poodleyparakeet t1_itrak78 wrote
z and y keycaps are swapped
cube_7x OP t1_itri9ji wrote
It’s ISO-DE means QWERTZ with üöäß
cube_7x OP t1_itris35 wrote
I watched some videos but nothing in particular. Just followed the instructions on the nice!nano website. Just be sure to get mill max sockets so you can swap controllers or go directly for the nanos on a fresh board. Desoldering a controller is the worst. The battery is easy just get the right one.
Wibzomby86 t1_itrvz3w wrote
This is my dream keyboard , thanks for sharing
cube_7x OP t1_itrx3zy wrote
The enter key is the fn key, the pn key is tab, home is space, the left arrow is backspace and up arrow is shift cause i don‘t have those in that size.
cube_7x OP t1_itrxg2s wrote
You‘re welcome 😬
kasperhausa t1_itsbsas wrote
Sehr cool! Benutzt du das auch auf Arbeit?
pabloescobyte t1_itsew3h wrote
With these being wireless have you run into any issues at all where you have any missed inputs?
cube_7x OP t1_ittrkeg wrote
Ja benutze ich auch auf der Arbeit. Muss auf Dauer mal schauen wie laut das ist und ob das irgendwen stört, bis jetzt aber kein Problem. Sonst schaue ich nochmal nach anderen Switches, ist ja hotswap, oder ich lube die, die jetzt drin sind.
cube_7x OP t1_ittrpts wrote
No it works really good i had no issues at all. I did‘nt have a chance to check it‘s gaming capabilities yet.
cube_7x OP t1_ittrqb1 wrote
Thanks!
cube_7x OP t1_ittsf42 wrote
https://github.com/cube7x/zmk-config I don‘t know if you have access with this link, I set it up as private and can‘t change it. As I said before in another comment I used many F keys that I afterwards program with the needed function directly on my laptop or pc.
cube_7x OP t1_iu425kt wrote
I have tested the board in league of legends and call of duty and i did not have any issues.
cube_7x OP t1_itpe2ek wrote
This is a Helidox Corne V3 with nice!nano V2 controllers and 301230 80mAh lipo batteries. I got rid of the OLED displays and did not use any RGB LED’s to get as much battery life as possible. The power buttons aren’t perfect and I’m looking for a better solution, the rest went pretty nice. I’m thinking of printing cover plates for the buttons and controllers to get a cleaner look. In ZMK there is no ISO-DE layout at the moment so I had to build it myself. I used many modifier functions and F buttons that I programmed on my MacBook und windows pc to the signs and functions that I needed.