Diligent_Nature t1_jad70j5 wrote
From the Larson web site:
Why isn’t my door closing all the way? There are pads in the top mounting rail. In order for the closer to operate correctly, they need to be separated. To do that, just push the door open to 90 degrees and tighten the set screw in the pad closest to the hinges. Then just push the door closed to disconnect the pads. Make sure you have removed the hold open pin.
Obizues OP t1_jad8h8l wrote
What is the pad? Is that the thing with a circle that has nothing in it?
Voxico t1_jadgz42 wrote
Speculating, but based on what the other guy said from the website - do the two pieces with the arrows separate and slide apart, possibly with a spring between them if you gently try to slide?
My guess would be that you need to open, hold them apart so there’s some tension, then tighten the screw that’s in the little part so it stays in place (or, if there’s no screw, get one)
Diligent_Nature t1_jaeyfty wrote
I believe so. You need a screw that fits in there. Then you can follow the procedure.
Viewing a single comment thread. View all comments