Comments

You must log in or register to comment.

yoBlriG t1_j9hmysd wrote

Video is not much more helpful than the picture. It needs more context. I can't tell where the forces are coming from or how you could get at the failure to repair it. Likely adhesive won't work. You probably need to find some way to buttress the joint.

2

bill_gannon t1_j9ht93e wrote

It needs to be welded. You could do some creative fabrication but just take it apart and get it welded.

5

Mildly_Angry_Biscuit t1_j9i1cus wrote

That is definitely a joint that's under flexing stress; anything other than a brazing or welding repair will not last. If you can free up that part so its available, a weld repair on that is maybe a 10-15 minute job (especially if you don't mind it not looking perfect!).

4

huntsvillian t1_j9i5xvl wrote

Replying to bill_gannon (#1,910,993)

This x 100. It broke, and it broke there for a reason. JB Weld isn't going to cut it.

In fact given that it cracked around a factory weld/location/mounting point, it probably needs some reinforcement as well.

1

Pravus_Belua t1_j9ide6d wrote

Your submission has been removed for one or more of the following reason(s):

  • Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

  • Please do not use /r/DIY as your first stop for questions - we are not Google.

  • Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

  • Have you already done some basic research and are still stuck?

  • Please include what research you have done in your question so that others do not repeat your steps.

  • Consider posting your question in the sticky thread at the top of the subreddit.

  • Ask your question in our Discord server in the appropriate channel.

Please read our Full Sub Rules before resubmitting.

If you believe this was a mistake, please message the moderators.

###Do not respond to this comment - you will not receive a response.

1