Viewing a single comment thread. View all comments

MorrisWayne OP t1_j5zuzr2 wrote

Reply to comment by dark-archon in Increasing hight of drawing table by MorrisWayne

The first solution is exactly what I'm hoping for! Do you know what I need to look for to get that done? I don't know what such a connection is called.

1

dark-archon t1_j5zxj1h wrote

First, you will need to remove the wheels and see if they are bolts.

If they are bolts, measure their width to get their size and replace them with something like this. https://www.meubelpootjes.be/plastic-ronde-meubelpoot-6-cm-m8-k000381

If they are not bolts, see if you can replace them by removing the black inserts in the bottom beams.

2

MorrisWayne OP t1_j60jmuk wrote

I thought the wheels had a click system, but they are indeed bolts. Dankjewel! Dit is de perfecte oplossing!

1

dark-archon t1_j60z675 wrote

Graag gedaan. Goed de maat van de bouten nakijken, wss is het een een M8 of M10.

2

MorrisWayne OP t1_j635ypo wrote

Het is inderdaad M8. Ik ben niet zo bekend met de maten en het leek even op 7mm, dus bedankt voor de extra info!

2