Yes it is safe to remove. Make sure to take not of each spring clip holding the glass in place. They will all have to be engaged securely when you are done and reinstalling the glass, otherwise the heat from the combustion chamber will melt delicate components in the control cavity(usually below the combustion chamber, where the fire is supposed to be)

Also, use ONLY amonia-free glass cleaner. (The foaming kind works best.) Or else the glass will develope a foggy haze again very quickly. If you dont have the proper glass cleaner use two damp rags and a dry rag. Wipe the outside of the glass with the damp rag then wipe the inside face of the glass. Scrub gently and make sure its all moistened. Then after a few moments reapeat that with the second damp rag to pick up all the loosened grime. If needed use a brand new razor blade or utility knife blade to scrape off any baked on residue. May have to re-wipe with another clean damp cloth before throughly drying both sides with the final cloth.

Edit: i forgot to mention i install and service fireplaces for a living.

Yes. If you're paranoid, turn the gas off too.

Yes, I do it all the time. My glass has latches and a hinge on one side so it can be swung open for cleaning. I don't bother turning off the pilot light or anything, but if you're overly paranoid just close the gas valve.

Yes. I clean mine a couple of times a year.

There are special glass cleaners for wood stove doors.

Your submission has been removed for one or more of the following reason(s):

• Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

• Please do not use /r/DIY as your first stop for questions - we are not Google.

• Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

• Have you already done some basic research and are still stuck?

• Please include what research you have done in your question so that others do not repeat your steps.

• Consider posting your question in the sticky thread at the top of the subreddit.

• Ask your question in our Discord server in the appropriate channel.

Please read our Full Sub Rules before resubmitting.

If you believe this was a mistake, please message the moderators.

###Do not respond to this comment - you will not receive a response.