Viewing a single comment thread. View all comments

Only-Replacement-198 t1_j6aeg10 wrote

Could you weld a thin steel plate to cover hole in roof

1

nivenhuh OP t1_j6ah77p wrote

I know pretty much nothing about welding — is it difficult to do?

1

OutinDaBarn t1_j6aurdj wrote

It's probably not where you want to learn to weld. Metal, screws and caulk will work just fine. I would use a seam sealer caulk for automotive use.

2

nivenhuh OP t1_j6b8l9d wrote

Does the automotive caulk hold up more than roofing caulk?

1

OutinDaBarn t1_j6bhyrd wrote

It's made to help seal steel pieces together. Look at the 3M brands.

2

nivenhuh OP t1_j6bp34p wrote

Nice, I found the 3m dynatron seam sealer at autozone nearby! Thanks for the pro tip!

1

Mobely t1_j6ayyb1 wrote

I’d use rivets , smooth on both sides

2

nivenhuh OP t1_j6b8s4y wrote

I’ve never used a rivet gun before 😅. Sounds fun, but more work than roofing metal-to-metal screws?

What would be the benefit? (Other than aesthetics)

1

nivenhuh OP t1_j6bl99k wrote

Ok, I did a bit more reading into using rivets. Main question is: will a 3/16” aluminum rivet be weatherproof, or do you need silicon over it?

1

Mobely t1_j6d9qe2 wrote

Ships are riveted together, so it can be pretty damn weatherproof. Screws and rivets will be about the same work but with screws, what are you going to do about the pointy end?

1

nivenhuh OP t1_j6e06ci wrote

Yeah, I went ahead and got a rivet tool. Going to go that route — thanks for the suggestion!

1

nivenhuh OP t1_j6f40bq wrote

It worked out really well! Thanks for the suggestion!

1