Uncanevale t1_j2dx6lm wrote
I would not grout that. Caulk matched to existing grout would be my preference.
If you want a line a fixed distance from the floor, just use a thin board of appropriate thickness to slide a marking device along the trim
aio-z t1_j2e0i5k wrote
Agreed. Never grout edges or corners. They only end up cracking and causing more problems
Direct_Big_5436 t1_j2eg31i wrote
This is correct and use masking tape to keep straight lines on both sides while using a tool or card stock to make the caulk look super smooth without lumps or edges.
jshxx OP t1_j2ei8ed wrote
Thank you!!
amboogalard t1_j2enmv5 wrote
I’m really glad you’re taking this advice; the floor will flex differently than the walls, as does tile from skirting, so it would just be crack city. A flexible caulk is 100% the way to go. Or a wood corner bead (looks like a long stick with a side profile like 1/4 of a circle); less cleaning, though some caulks do much better with resisting grime than others.
Atari_Enzo t1_j2ewq6i wrote
DAP Alex Plus White Acrylic caulk is your solution here.
happyimmigrant t1_j2fd6cy wrote
This Alex really let me down on my last project, it has been cracking like hell. Had great luck in the past but wouldn't risk it again
m3galinux t1_j2fgsqo wrote
Same here. Worked great 3-4 years ago, but tried it again last month and it was awful. Consistency was all over the place and cracked like crazy once dry. Maybe they changed something in the formula recently?
0LowLight0 t1_j2fjftl wrote
GE Silicone II is flexible and can be used anywhere there's going to be moisture or movement.
My favorite is Polyseamseal. Done deal.
jeffprobst t1_j2fuhcq wrote
Agreed that silicone is the way to go for areas with moisture, but they can be more of a pain to clean up since they're not water soluble. Acrylic caulks can be cleaned up with water before they're dry so it's a bit more forgiving if you're not a caulking pro.
In theory, both should be good for areas with movement but I've heard silicone holds up a bit better over time.
WelcomeTheLahar t1_j2fnaoh wrote
Fair warning on white caulk: most of it isn't intended to hold up as a finished surface. It tends to yellow with age (and maybe uv exposure?) So if you want it to look best you should paint it. This does of course depend on the product you use. The more silicone a caulk has the harder it is to get paint to stick to it. And there may be some white caulk that doesn't yellow. I can't tell you one though!
As a post lower down says a "shoe molding" aka quarter round is the right product for this job.
FireWireBestWire t1_j2fg4vl wrote
And if you watch a couple of videos on caulking it will give you some tips on how to get it straight and even. The back of an old toothbrush handle works very well if you want to tool it after your line.
damntalldj t1_j2frgb9 wrote
There is such a thing called sanded caulking that you can find to match the color of the grout. And since its silicone you won't have cracking issues.
Viewing a single comment thread. View all comments