Submitted by CvilleHokie605 t3_zanra4 in DIY
CvilleHokie605 OP t1_iyn6v9n wrote
Reply to comment by [deleted] in ZipLine Post by CvilleHokie605
Can't drag it on the road that way :(
Zero trees in the vicinity of the start area. I do have a playset but there are warnings about not connecting it to playsets as they are not usually sturdy enough. All the vertical posts on that are 4x4s and I'd bet they'd snap under the load. I don't really want to build a big structure, just looking to try and comply with the load requirements with a vertical substitute for the 12" diameter post.
accountonbase t1_iyni3th wrote
You don't need to transport the pole intact, and rental trucks can be really cheap for a few hours. You would just need to find one and cut it into more manageable lengths for the truck.
Since they're usually 30-60 feet, even on the low end you could easily get two posts out of it. For example, this one is 35 feet and about 640 pounds. Even cutting it in half is manageable for you and two friends (ideally 3 and maybe even some pulleys or other assistance).
​
You might even be able to find somewhere nearby that you can buy them from, but for that you really might need to talk to a utility contractor, and at that point it's probably cheaper to ask if you can get one they're going to replace so they don't have to haul it away themselves.
usedTP t1_iyoiikp wrote
My local utility keeps replaced poles and damaged poles in their yard just for this type of project. A chain saw and a truck is all you need.
Viewing a single comment thread. View all comments