Viewing a single comment thread. View all comments

DanielLikesPlants OP t1_ixszwvg wrote

Reply to comment by GloomyDeal1909 in Can i replace my broken glass counter top with polycarbonate? by DanielLikesPlants

THANK YOU! So it didnt bend easily at 1/4” ? thats the answer i was looking for ty

1

GloomyDeal1909 t1_ixt0sxa wrote

Mine had middle support so that helped. Mine was 38381/4" and was just flexible enough to fit into the lip on the table.

It didn't warp or bend or anything

1

DanielLikesPlants OP t1_ixt1zzk wrote

i have a middle support too, but ah that’s interesting i dont have a lip, it would just sit on top. i think that should be fine though

1

Artisan_sailor t1_ixvdgeb wrote

It will be more flexible than glass. I would go thicker if possible.

1

ithunk t1_ixtplwk wrote

I have a patio roof made of polycarbonate sheets. 1/4” from same tap plastic store in Berkeley. It bends when it is larger than 4 feet across. The sheet I got was a 4x8, so it bends and won’t stay up, so we had to put a wood bar in between and make them 4x4 squares, which are not bending. Why do you want poly for interior and not acrylic (which is more clearer, but is brittle)?

1