lightknight7777 t1_iye5mlk wrote
Reply to comment by rvgoingtohavefun in Lightbulb not working by BSPirat
If you plug a cable into an outlet it can pull out exactly the same. The female connector is always secured to the back wall and is no different than an outlet being there. And the appliance is firmly connected into the male plug hardware. I'm just converting the appliance to a plugged appliance.
https://youtu.be/JYBfMKp7Xrw?t=35
Am I not explaining something correctly? The only thing you have to know is that the plugs are the right spec. Like you wouldn't grab 220V plug adapters. It's literally like running an appliance to an outlet. I'm not talking about cramming anything into a cramped space.
What are you imagining I'm saying? Do you have any kind of example?
Like for example, let's take it to the most extreme possibility of just converting random things into plug versions, are you saying the following would be dangerous/illegal (the guy doesn't use a polarized plug like he should and is the epitome of a beginner, but I'm talking about the concept): https://www.youtube.com/watch?v=6xuIeFafLIQ
The wires are secured into the plug. The plug coming unplugged wouldn't do any damage besides cutting the power. Really curious what you were thinking about.
rvgoingtohavefun t1_iyefwf2 wrote
We're talking about light fixtures, here, or, at least, I thought we were. You said "deal with twisting those wirenuts at the top of a ladder", and most appliances (other than light fixtures, which I assumed you were referring to) aren't installed in a location that requires a ladder.
That first video is installing a stove/oven plug or dryer plug or something. I didn't really watch it. I'm not sure what you're getting at with that.
The second video is installing a fixture (that already uses flexible lamp cord) and plugging it into an extension cord (note that using an extension cord for permanently-installed fixtures is also not allowed, but that's not what we're talking about anyway).
We were talking about things that otherwise required wire nuts and were at the top of a ladder, so I presumed we were talking about normal light fixtures.
If you're putting a female end on the wires up in the ceiling and burying it INSIDE a junction box, that's not allowed.
lightknight7777 t1_iyegi3c wrote
That's a lot of assumptions.
I'd be absolutely fascinated to know how you thought there being a plug there could cause an arc that would then somehow not short the breaker in a way that a wire nut would. From an electrical perspective, there's virtually no difference between a male to female plug connection and a wire nut.
Viewing a single comment thread. View all comments