Submitted by otr_otr_otr t3_z3h4ag in DIY
TheFishBanjo t1_ixm6318 wrote
The only bathroom that I ever encountered with a septic smell was because the wax ring under the toilet was defective. They are cheap so just change that and reseat that toilet.
Then, figure out a way to reach that gas valve without stepping on the toilet. A folding step ladder for example.
notoriousbgone t1_ixm9wtd wrote
Wax ring is an American thing, we don't have them in Europe at least not as s standard thing. We use large diameter PVC couplers with rubber gaskets for connection between toilet and floor pipe.
otr_otr_otr OP t1_ixmbu2d wrote
Yeah I looked again at my toilet here - it flushes to the rear (but stands on the floor - so not a proper hanging toilet either), and there are multiple PCV pipes / couplers that go into the wall. All quite crusty and old.
​
Removing that toilet and redoing the PVC portion is more than I would endeavor, but I suppose that this is what the plumber had in mind.
​
Any intermediary solutions, such as drowning it in Silicone?
Or will that not work on PVC anyway?
Viewing a single comment thread. View all comments