Malvania t1_ixuo23j wrote
Reply to comment by jbaird in Can a single stud hold a 13kg TV by YoMADAv2
The TV is 58", not the mount. I'd still expect the mount to be 20" or so, though.
JBagginsKK t1_ixupihm wrote
Even still, studs should be 16” apart
Malvania t1_ixupy0z wrote
"Should" is the key word, though. Some older homes have wider spaces, and fireplaces sometimes do as well
writetoAndrew t1_ixuq6g6 wrote
i think older homes typically have smaller spaces? i thought building codes were relaxed to allow bigger spaces between studs? am i getting that backwards?
Malvania t1_ixurm5p wrote
I could well be getting it backwards. I was thinking that there wasn't so much standardization 50-100 years ago and that 20-24 inches were more common, but that could be my area or just one of those things that you hear so much that you think is true.
writetoAndrew t1_ixxfskn wrote
I wasn't even thinking for houses that old. You may be right.
Real_Nugget_of_DOOM t1_ixuqfzd wrote
Not necessarily. Non-load bearing interior wall studs can be as much as 24" inches apart by some code and then there's likely to be some slop room in the actual build process.
NR1890DCS t1_ixvrnk5 wrote
Some houses can be framed on 12”, 16”, 19.2” or 24” OC. Depending on required insulation values or structural requirements.
Viewing a single comment thread. View all comments