Comments

You must log in or register to comment.

death_by_chocolate t1_irkl0bt wrote

Well, they have pumps to pump the water out. Maybe the pump has failed.

2

Valendorf t1_irkm41y wrote

There’s usually a water discharge pump connected to the drain line in the bottom of the washer. Pretty easy to replace.

3

OftenCavalier t1_irks865 wrote

Usually involves switch that sends signal to stop fill and then one to start pump for drain. The overflow may have caused safety issue stopping the drain.

2

booboo_bear t1_irktgh0 wrote

Run a snake down the drain, perhaps a sock has stopped it up.

1

Sheffieldsvc t1_irkuslb wrote

Many of these types of washers have a filter that collects stuff from the wash water. My LG did, and I imagine if it got clogged from never cleaning it, it would back up eventually.

1

H20fearsme t1_irkwbxz wrote

Likely the drain pump. 3 screws and a wiring harness. What type of washer do you have?

2

H20fearsme t1_irky4tm wrote

Replying to Queasy_Doughnut7507 (#61,138)

Look for used appliances in your area. Maybe even Facebook as there's some guys that do this in their spare time. But also some manufacturers use parts that aren't proprietary to their products. So get your blow up, it's number 43, separate your units, and gently turn over your washer and locate the part I mentioned. There's a small chance a Frigidaire has the part. But because it's a part long discontinued, it may be worth buying a used since you'll be spending 50% of a used on an old part that's only really a $40 part when it's a newer model washer. Hopefully that helps some.

Edit I meant to say look for used appliance repair guys because they may have your part you can scrap from them

1

ComprehensiveElk123 t1_irl640y wrote

Does it have a display code? Mine said 5d on the little display by the dial.

1

Gloomy_Skill3766 t1_irldipv wrote

There may be something physically obstructing the pump impellers if there is no filter.

1

AaronsDad1121 t1_irlinz3 wrote

Try Repair Clinic at repairclinic.com 1.800.269.2609

1

jakkarth t1_irn453t wrote

Your submission has been removed for one or more of the following reason(s):

  • Your post was regarding cooking, cleaning, general maintenance items.
  • Your post was regarding sewing, general automotive repairs, cosmetics.
  • Your post was regarding software design, CNC, 3D or laser printing.
  • Your post was otherwise not considered a good topic fit for this subreddit.
  • Please consider submitting these projects to /r/crafts, /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your project.

Please read our Full Sub Rules before resubmitting.

If you believe this was a mistake, please message the moderators.

###Do not respond to this comment - you will not receive a response.

0