Submitted by EnuqieuEsur t3_y2y1iy in DIY
EnuqieuEsur OP t1_is5ljah wrote
Reply to comment by BellyScratchFTW in 10x20 Shed base materials. by EnuqieuEsur
The pressure treated lumber was to build a perimeter to contain the crushed 3/4 stone.
I’m in MA so though there are no major termite concerns it is still something worth treating ahead before the shed is dropped.
BellyScratchFTW t1_is5nz9d wrote
Oh, glad to hear about the termites not being a big problem. I think the rest is just up to you. If you dig down the top soil (at least the grass layer at minimum), you'll likely have your 4 inches of perimeter right there.
If you chose to not take out the top soil, you have the option of extending your gravel "pad" by a foot or so all around. This will naturally taper off to grass and likely wouldn't be an issue later. But if you wanted a cleaner look, I'm confident that your idea of using pressure treated lumber or blocks would work well.
Your gravel will likely not put much pressure against the lumber or blocks and push them out.
Viewing a single comment thread. View all comments