Viewing a single comment thread. View all comments

Hey_look_new t1_irbw01k wrote

Reply to comment by bms42 in Foam/paste that can be injected into a hole and when it hardens, it's as strong as hardwood? by flying-benedictus

this is the correct solution

if it seems like it's too much work and too costly, it's probably the correct renovation

97

deeperest t1_irc753i wrote

> if it seems like it's too much work and too costly, it's probably the correct renovation

This is especially if true if THIS renovation will require three others to be performed at a later date.

33

AlienDelarge t1_ircowr5 wrote

Buying JB weld in industrial quantities mixing it and filling the wall cavity meets the too much work and expensive criteria but really isn't the right solution.

17

PositiveNegitive t1_ird5son wrote

While it's not right I don't understand OP's epoxy problem, you can buy 1L of epoxy at any old hardware store right, you don't need to squeeze out 100 that you bought from the super market....

7

Hey_look_new t1_ircvok2 wrote

right, sometimes you just get dipshit suggestions from dipshits

2

AlienDelarge t1_ircxb87 wrote

I've seen evidence that some previous owners are self dipshitting.

3