Viewing a single comment thread. View all comments

Affectionate_Zone623 t1_isjxh9q wrote

As a contractor I see this all of the time. The best remedy is to install a pair of 1-gang old work or remodel boxes. These are usually blue boxes with tabs that flip out and hold tight to the back of the wall. Install is just a matter of cutting the hole, feeding the wire into the box, and tightening the screws. If you decide to proceed just be cautious of the wire in the wall when cutting.

25

Pererez35 t1_isk5gco wrote

They make remodel boxes specifically for lights. They’re round and accept 8-32s, single gang boxes are for 6-32s

9

SirGlenn t1_iskknzw wrote

For those with minimal wiring knowledge, there are electrical boxes called: new work, or old work.

5

MiddleChildSyndrome3 OP t1_isk9yim wrote

Checked with a friend who has a bit more experience than I and he recommended this route as well, thank you!

2