Viewing a single comment thread. View all comments

danauns t1_itlqexn wrote

It's fine.

You should anchor the plywood, in fact it would have to be anchored to pass inspection if you ever chose to. ....you can't just have hard wired lights floating freely.

Add a screw or two to hold the wood in, and also anchor the controller/junction box and your good.

1

otaknap OP t1_itlrmbd wrote

Thanks so much for your reply!

I was definitely going to anchor the junction box but I wasn't going to anchor the plywood. Depending on the circumstance and how tightly I can get the plywood to fit, I might have to. I wasn't planning on getting an inspection as I'm pulling the line from an existing circuit light and won't be touching the panel.

0