Dr_Poofist t1_isvmhyq wrote
You don't dress cut off wheels. You cut with them carefully and if there are chunks missing the disc is garbage.
I've only ever had a disk clog when I tried it on non ferrous metals when it wasn't meant for them.
You only ever dress grinding stones.
DadOfFan OP t1_isw6zwn wrote
There are no chunks missing, only clogged with swarf.
Dr_Poofist t1_isw988g wrote
I've probably gone through hundreds of these cut off discs over the years and never had one "clog" and stop cutting. These are abrasive discs that abrade as they cut - they dress themsleves as you go.
DadOfFan OP t1_iswamwg wrote
As I described in the topic. I am now thinking its "soft" iron and cheap(ish) wheels. they work great on sheet metal.
Viewing a single comment thread. View all comments