Submitted by drummerene t3_xvnqbk in DIY
chunky_ninja t1_ir414r5 wrote
Reply to comment by drummerene in Can i use 3 in 1 brand all temp fluid to lubricate drill bits when drilling (steel?) hinges? by drummerene
Not really. Oils are oils, alcohols are alcohols. Alcohol wouldn't do much more than water. Oil can readily be dissolved in lighter oils (mineral spirits) or even WD-40, in a pinch. From there, you can just use soapy water, or degreaser if you have it. You can also try dishwasher detergent, which is often sodium hydroxide, but then you gotta worry about rusting your part. Bottom line - just use soap and water. If that doesn't do it, slather it up with WD-40 and then try to wash it off with soap and water again.
Viewing a single comment thread. View all comments