Viewing a single comment thread. View all comments

1feralengineer t1_it7jfz0 wrote

Has any of the rot migrated to the roof sheathing or rafters (trusses)?

Is there flashing, or evidence there was flashing at one time?

2

Qwaszx1987 OP t1_it7kwnf wrote

That’s my main concern. I am hoping it’s still protected because there is still some of the facia board intact. I believe there is flashing, but it looks like the gutter was installed lower than the flashing extends if that makes any sense. I have photos, but I’m not sure how to include those in the post.

2

1feralengineer t1_it7pdiz wrote

The first thing is to fully assess the extent of all the damage (you don't want to hang new fascia and soffit from rotting rafters).

Poking around with a screwdriver will reveal areas of heavy damage, but finding nothing with the poking around won't fully rule it out. At some point you will have to start demo to know the extent of the job. Contractors know this and it makes estimating not only the cost but the amount of time difficult. So at times like this where they have more work than time, getting someone to even look at it is near impossible.

Like finding a job, finding a contractor is aided greatly by networking. Ask everyone, including strangers who they know. Don't rule any lead out. Maybe someone knows a local retired guy that can walk you through it (you do the work, they drink your beer).

2

Qwaszx1987 OP t1_it8915w wrote

Thanks for the reply. I will definitely do a bit more investigating prior to moving forward. I like the idea of a former pro walking me through the steps while they kick back. Saves money and allows me to develop snew skills at the same time.

1