Viewing a single comment thread. View all comments

domdogg123 t1_it7puur wrote

Brand/model?

Check the air gap by the sink (it gets clogged)

1

HoneyBadgerGrows OP t1_it7qz00 wrote

Whirlpool quiet partner II- is that the skinny tube connecting to the sink pipe?

2

ripgressor1974 t1_it7s3jf wrote

Yes, some need to be vented or have a high loop as shown in this picture. https://ggrhomeinspections.com/wp-content/uploads/2021/04/high_loop-300x266.jpg

2

HoneyBadgerGrows OP t1_it7tq01 wrote

https://imgur.com/a/mHKmjYT

1

ripgressor1974 t1_it7uoma wrote

Sorry, can't do imgur here at work.

1

HoneyBadgerGrows OP t1_it7utmz wrote

No problem- just a pic of mine- it is not clogged, I did notice when I brought the hose up to where it would be a high loop some water did come out

1

ripgressor1974 t1_it7xq3k wrote

For sure find a way to add the high loop to your drain hose.

I had an issue recently with my dishwasher not draining at all. I ended up taking the hoses off the pump (underneath dishwasher) and found some grapefruit seeds that had got past the filtering stuff inside the dishwasher somehow and that combined with soap scum and/or grease finally clogged enough that no water would pass when the pump came on. It may be worth removing the hoses from the pump to look in them and the pump itself for clogging.

Good luck.

2