Viewing a single comment thread. View all comments

Bokbreath t1_jdb8ae8 wrote

Masonry drill and wall anchor. Then screw an eye hook in.

1

gulpgulpgulp OP t1_jdb92z0 wrote

Can you explain? I have done the whole drill a hole with a masonry bit > rawlplug > screw, do you mean do the same but instead of a screw just get a threaded hook and use that? I guess if it matches the diameter of the rawlplug it should work.

Do you think some large zip ties would be ok for holding up a potential 100lbs of weight, because its pulling force i think it would be ok since its not going to hold the weight of the shelves.

1

Bokbreath t1_jdbay3t wrote

That's it. Replace screw with threaded hook. Personally I'd use some wire because zip ties might rub and wear. Or put a corresponding hook on the shelves and use a small chain.

1

shifty_coder t1_jddq1px wrote

If the shelf already has an anchor strap attached to it, just screw right through that into the rawlplug.

1