Submitted by Kind-Effective-2165 t3_123967p in DIY
Kind-Effective-2165 OP t1_jdtshua wrote
Reply to comment by spn2000 in How to resolve dryer issues by Kind-Effective-2165
Condensation tray? Lol sorry if that's another name for the lint trap/filter, I've just never heard it before
And yes I've cleaned the filter.
spn2000 t1_jdtt2qx wrote
Well.. the point of a dryer, is to remove water from your clothes.. said water need to go somewhere.. usually there is a big pull-out tank that you must empty after every job. If this is full, the machine will usually stop, and if it overflows you should have moisture sensors that stops the machine.
I have no idea what type of dryer you have. But the usual ones have a condensation tray.
1955photo t1_jdttt9b wrote
Not in the US. Most dryers are vented to the outdoors and that's where the moisture goes.
spn2000 t1_jdtuhh3 wrote
Yea, in Europe the water will usually be in a tank. It’s hot, and as such will warm your house.
I had a dryer once that would stop at uneven intervals during its cycle. I eventually found the culprit to be the door switch. The machine thought the door had opened, no indications or door warnings. Machine just stopped.
Well anyways, google/openAI is your friend good luck
1955photo t1_jdu0tlu wrote
Most locations in the US have more trouble cooling a house than heating it. But for those living in the frozen north, the European style of dryer would be worth looking into.
Kind-Effective-2165 OP t1_jdtub2w wrote
Upvoted cuz this is entirely new knowledge to me lol. But yea like the other reply, in the US most dryers vent the air outside, along with the condensation, in a singular process.
Viewing a single comment thread. View all comments