allangee t1_je1hmhw wrote
I'm guessing the original came with some kind of mounting clips that screwed to the wall first.
You could just use squares of plywood, built up to the same thickness of the inside of the clip, and then add a spacer the same thickness of the clip. fasten the plywood to the wall then hang the cabinet.
In the pictures, it also looks like there's a small notch for a similar clip -- there was probably some kind of modular system.
chocomu OP t1_je1k334 wrote
That makes sense, I too wondered if it was originally built for a modular system given the era. Thanks so much!
koolaidisthestuff t1_je4wlw9 wrote
Make some like 3” wide furring strips that run the length and mount them on the wall where you wanna hang it. Use the clips as hangers maybe.. looks 1/2”-3/4”
Some 3/4” CDX furring strips would probably do the job well. MDF would work too probably. I mean it’s a single cabinet you’re not gonna be loading it down heavy I’d think.
Viewing a single comment thread. View all comments