Submitted by iamintheforest t3_123wj25 in DIY
PublicRedditor t1_jdwrkap wrote
How about flooding it with water to see if water comes out the other end? Or blast it with compressed air?
iamintheforest OP t1_jdws0cd wrote
Good idea! But...it's sealed on said other end some 60 feet away
PublicRedditor t1_jdww6r5 wrote
Wire seven 10' lengths of rebar together and shove it through, knocking off the cap on the other end?
iamintheforest OP t1_jdwyoe3 wrote
pvc glue ...
PublicRedditor t1_jdx5kbx wrote
Well there's the other half of where you went wrong :). Please tell me you at least have a string already pulled through the pipe.
I have the same setup on my 20' wide patio but it's only a 2" pvc pipe. I made sure NOT to glue the caps on and TO have a string pre-run through to be able to pull anything if I do ever need to use it.
Good luck!
iamintheforest OP t1_jdx5yyy wrote
it's open on one end. I have no trouble feeding things to the end, just need to reliably detect those things.
Viewing a single comment thread. View all comments