My dad rescued this school chair from a skip in the 70s. They were throwing them all out and replacing them with soulless plastic onesCressiDuh1152 t1_jb2xly0 wrote
Reply to comment by Decimator714 in My dad rescued this school chair from a skip in the 70s. They were throwing them all out and replacing them with soulless plastic ones by 5552020
Half the time people clinging to this also refuse to learn the repair methods for modern items.
Especially cars.
Fromanderson t1_jb3f1xp wrote
Planned obsolescence is a thing.
I own an old cabover truck from the 60s. While finding certain parts is challenging these days everything on it is serviceable. Even after owning it nearly 5 years I'm still finding lubrication points I hadn't noticed before. Even the shafts that operate the cams for the air brakes have grease fittings.
By comparison some of our newer company trucks have the brake rotors on the inside of the axle flange. Every time the rotors have to come off , the axles have to come out of the differential. That means new axle seals, diff gasket and gear oil are required for a brake job.
Seriously, all they had to do was make the axle slightly shorter and put the rotor on the outside, like every other manufacturer has done for decades.
Decimator714 t1_jb43ojf wrote
WOW now that is something. Stuff like that is exactly why I enjoy working on my own cars, but would absolutely never consider becoming a mechanic.
Viewing a single comment thread. View all comments